單項(xiàng)選擇題

Your network contains the servers configured as shown in the following table. Name Server role Private IP address Public IP address Server1Routing and Remote Access server192.168.1.1 131.107.0.1 Web1 Web server 192.168.1.2 ? Your company is assigned the public IP addresses from 131.107.0.1 to 131.107.0.31.You need to ensure that Web1 is accessible from the Internet by using https://131.107.0.2.What should you do from the Routing and Remote Access console？（）

A. From the Static Routes node, configure a static route.
B. From the server properties, configure SSL Certificate Binding.
C. From the NAT interface, add an address pool and a reservation.
D. From the NAT interface, configure the Secure Web Server (HTTPS) service.

你可能感興趣的試題

單項(xiàng)選擇題

Your company has a main office and two branch offices that are connected by wan links. The main office runs the DNS service on three domain controllers. The zone for your domain is configure as an active directory-integrated zone.Each branch office has a single member server that hosts a secondary zone for the domain. The DNS servers in the branch offices use the main office DNS server as the DNS master server for the zone. You need to minimize DNS zone transfer ove r the WAN links. What should you do?（）

A.Decrease the retry interval setting in the start of authority (SOA) record for the zone
B.Decrease the refresh interval setting in the start of authority (SOA) record for the zone.
C.Increase the refresh interval setting in the start of authority (SOA) record for the zone.
D.Disable the netmask ordering in the properties of the DNS master serve for the zone.

單項(xiàng)選擇題

Your network contains a server named Server1 that has the Routing role service installed. Server1 has two network connections. One network connection connects to the internal network. The other network connection connects to the Internet.All network connections connected to the internal network use private IP addresses. You install a Web server named Web1. Web1 hosts a secured Web site that only allows connections over TCP port 8281. Web1 is connected to the internal network.You need to ensure that the secure Web site can be accessed from the Internet.What should you do from the Routing and Remote Access console？（）

A. Configure Routing Information Protocol (RIP), and then activate authentication on the RIP interface.
B. Configure Routing Information Protocol (RIP), and then configure the incoming packet protocol settings on the RIP interface.
C. Configure Network Address Translation (NAT), and then add a new service to the NAT interface.
D. Configure Network Address Translation (NAT), and then enable the Secure Web Server (HTTPS) service on the NAT interface.

无码高清视频|成人自拍视频|欧美成人午夜无码A片秀色直播|草美女视频网站|美女被操网站在线观看

你可能感興趣的試題