單項選擇題

Nexus7000# config t
Nexus700（config）# interface ethernet 2/11
Nexus700（config-if）# switchport mode private-vlan host
Nexus700（config-if）# switchport private-vlan host-association 14 50
Nexus700（config-if）# exit
Nexus700（config）#
What will this command sequence achieve？（）

A. associate interface E2/11 to community VLANs 14 and 50
B. associate interface E2/11 to secondary VLANs 14 and 50
C. associate interface E2/11 to primary VLAN 50 and secondary VLAN 14
D. associate interface E2/11 to primary VLAN 14 and secondary VLAN 50

你可能感興趣的試題

多項選擇題

Each port that is configured to use LACP has an LACP port priority. Which statements are true about LACP port priority？（）

A. Port priority value can be configured between 1 and 65535.
B. A higher port priority value means a higher priority of LACP.
C. Port priority can be configured so that specific links can be chosen as active links rather than the hot standby links within the port channel.
D. LACP uses the port priority with the port number to form the port identifier.
E. LACP Port priority default value should always be changed

單項選擇題

Which attribute is used to pass the user role back to the Nexus when remote AAA is enabled？（）

A. Cisco AV-pair
B. TACACS+ or RADIUS ack frame role attribute
C. DH-CHAP challenge attribute
D. privilege level attribute

无码高清视频|成人自拍视频|欧美成人午夜无码A片秀色直播|草美女视频网站|美女被操网站在线观看

Nexus7000# config t Nexus700（config）# interface ethernet 2/11 Nexus700（config-if）# switchport mode private-vlan host Nexus700（config-if）# switchport private-vlan host-association 14 50 Nexus700（config-if）# exit Nexus700（config）# What will this command sequence achieve？（）

你可能感興趣的試題

Each port that is configured to use LACP has an LACP port priority. Which statements are true about LACP port priority？ （）

Which attribute is used to pass the user role back to the Nexus when remote AAA is enabled？（）

Nexus7000# config t
Nexus700（config）# interface ethernet 2/11
Nexus700（config-if）# switchport mode private-vlan host
Nexus700（config-if）# switchport private-vlan host-association 14 50
Nexus700（config-if）# exit
Nexus700（config）#
What will this command sequence achieve？（）

Each port that is configured to use LACP has an LACP port priority. Which statements are true about LACP port priority？（）

Which attribute is used to pass the user role back to the Nexus when remote AAA is enabled？（）